Comment:	APRS IGate Meerbusch
Last status:	Running on Raspberry Pi with RTL dongle
Location:	51°15.76' N 6°36.83' E - locator JO31HG33PA - show map 4.3 km Southwest bearing 238° from Meerbusch, North Rhine-Westphalia, Germany [?] 12.2 km West bearing 292° from Düsseldorf, Regierungsbezirk Düsseldorf, North Rhine-Westphalia, Germany 34.9 km Southwest bearing 233° from Essen, North Rhine-Westphalia, Germany 43.5 km Northwest bearing 327° from Köln (Koeln), Regierungsbezirk Köln, North Rhine-Westphalia, Germany
Last position:	2025-02-14 03:13:41 UTC (1m45s ago) 2025-02-14 04:13:41 CET local time at Meerbusch, Germany [?]
Device:	DL1MX: rtl-sdr Python iGate (software)
Last path:	DB0OTV-10>APPM13 via TCPIP*,qAC,DB0GW
Positions stored:	6
Other SSIDs:	DB0OTV-2 DB0OTV-11 DB0OTV-6 DB0OTV
APRS igate – Statistics for 2025-02:
Stations heard directly:	12 on radio path – show map
Last heard a station directly:	2025-02-13 21:28:44 UTC (5h46m ago)
Position packets heard directly:	110 on radio path
Position packets sent to APRS-IS:	124 – show map

Only stations from which a position packet has been heard are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.