Comment:	Homemade IGATE with 2 Arduino Nanos
Location:	49°14.65' N 8°40.48' E - locator JN49IF08XO - show map 678.9 m Southwest bearing 240° from Malsch, Regierungsbezirk Karlsruhe, Baden-Württemberg, Germany [?] 4.0 km Northeast bearing 53° from Kronau, Regierungsbezirk Karlsruhe, Baden-Württemberg, Germany 63.0 km Northwest bearing 325° from Stuttgart, Regierungsbezirk Stuttgart, Baden-Württemberg, Germany 97.0 km South bearing 180° from Frankfurt am Main, Regierungsbezirk Darmstadt, Hesse, Germany
Last position:	2025-07-10 07:51:33 UTC (11m19s ago) 2025-07-10 09:51:33 CEST local time at Malsch, Germany [?]
Device:	KJ4ERJ: APRSIS32 (software, Windows)
Last path:	DB1SB-10>APWW10 via TCPIP*,qAC,T2XXX
Positions stored:	1
APRS igate – Statistics for 2025-07:
Stations heard directly:	25 on radio path – show map
Last heard a station directly:	2025-07-10 07:12:35 UTC (50m17s ago)
Position packets heard directly:	555 on radio path
Position packets sent to APRS-IS:	774 – show map

Only stations from which a position packet has been heard are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.