Comment:	Ingo auf Tour mit LoRa LILYGO T-Deck
Last status:	https://github.com/richonguzman/LoRa_APRS_Tracker 2025.03.28
Location:	52°27.10' N 13°06.65' E - locator JO62NK38HJ - show map 2.3 km West bearing 263° from Kladow, Berlin, Germany [?] 6.4 km West bearing 288° from Nikolassee, Berlin, Germany 21.8 km West bearing 248° from Berlin, Berlin, Germany 145.3 km Southwest bearing 222° from Szczecin, Szczecin, West Pomeranian Voivodeship, Poland
Last position:	2025-06-22 09:19:04 UTC (2h40m ago) 2025-06-22 11:19:04 CEST local time at Kladow, Germany [?]
Altitude:	19 m
Device:	Ricardo, CA2RXU: ESP32 LoRa Tracker (tracker)
Last path:	DL7UBB-9>APLRT1 via WIDE1-1,qAO,DL7UBB-10
Positions stored:	9114
Other SSIDs:	DL7UBB-10 DL7UBB-7 DL7UBB-08 DL7UBB DL7UBB-Y DL7UBB-6 DL7UBB-8 DL7UBB-12 DL7UBB-13 DL7UBB-8 DL7UBB-1 DL7UBB-5 DL7UBB-D DL7UBB-B

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.