Comment:	Passo Brocon 2000 mt 430.9500/435.9500 CC1
Last status:	https://brandmeister.network/?page=repeater&id=222248
Location:	46°06.25' N 11°39.25' E - locator JN56TC85MA - show map 8.0 km East bearing 72° from Bieno, Provincia di Trento, Trentino-Alto Adige, Italy [?] 10.3 km Northeast bearing 49° from Ospedaletto, Provincia di Trento, Trentino-Alto Adige, Italy 90.2 km Northeast bearing 34° from Verona, Provincia di Verona, Veneto, Italy 90.5 km Northwest bearing 325° from Venice, Provincia di Venezia, Veneto, Italy
Last position:	2025-11-02 14:59:50 UTC (8m13s ago) 2025-11-02 15:59:50 CET local time at Bieno, Italy [?]
Device:	R3ABM: BrandMeister DMR
Last path:	IR3ZXU>APBM1S via TCPIP*,qAS,BM2222
Positions stored:	1
APRS igate – Statistics for 2025-11:
Stations heard directly:	3 on radio path – show map
Last heard a station directly:	2025-11-02 13:59:28 UTC (1h8m ago)
Normal receiver range estimate:	30 km (Updated: 2025-10-31 14:39:00 UTC)
Position packets heard directly:	200 on radio path
Position packets sent to APRS-IS:	200 – show map

Only stations from which a position packet has been heard are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.