Comment:	LoRa APRS Igate & Digipeater Milano Sud
Last status:	https://github.com/richonguzman/LoRa_APRS_iGate 2024.12.06
Location:	45°25.36' N 9°10.51' E - locator JN45OK11AK - show map 4.8 km South bearing 194° from Milan, Province of Milan, Lombardy, Italy [?] 5.1 km East bearing 100° from Corsico, Province of Milan, Lombardy, Italy 122.8 km East bearing 71° from Torino, Provincia di Torino, Piedmont, Italy
Last position:	2025-06-22 18:12:52 UTC (3h8m ago) 2025-06-22 20:12:52 CEST local time at Milan, Italy [?]
Device:	Ricardo, CA2RXU: ESP32 LoRa iGate (igate)
Last path:	IU2NYE-10>APLRG1 via TCPIP*,qAC,T2NUERNBG
Positions stored:	1
Other SSIDs:	IU2NYE-7
APRS igate – Statistics for 2025-06:
Stations heard directly:	12 on radio path – show map
Last heard a station directly:	2025-06-22 17:46:42 UTC (3h34m ago)
Position packets heard directly:	303 on radio path
Position packets sent to APRS-IS:	408 – show map

Only stations from which a position packet has been heard are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.