Comment:	Monitoring 146.520
Mic-E message:	In service
Location:	42°44.00' N 106°18.87' W - locator DN62UR25GX - show map 12.6 km South bearing 161° from Mills, Natrona County, Wyoming, United States [?] 14.6 km South bearing 195° from Evansville, Natrona County, Wyoming, United States 14.8 km South bearing 180° from Casper, Natrona County, Wyoming, United States 129.4 km Northeast bearing 36° from Rawlins, Carbon County, Wyoming, United States
Last position:	2025-07-12 17:59:10 UTC (1d 15h21m ago) 2025-07-12 11:59:10 MDT local time at Mills, United States [?]
Altitude:	2408 m
Course:	261°
Speed:	9 km/h
Device:	Yaesu: FT1D (ht)
Last path:	KB7WCS-14>T2TTPP via W7PND-3,WIDE1*,WIDE2-2,qAR,W7MHF-1
Positions stored:	124
Other SSIDs:	KB7WCS-9 KB7WCS KB7WCS-5

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.