Comment:	Raspberry Pi APRX Rx-only iGate
Last status:	109.962 up:139:22:49:04 load 0.50 0.56 0.59
Location:	43°08.35' N 89°18.95' W - locator EN53ID23CJ - show map 5.7 km Northeast bearing 66° from Maple Bluff, Dane County, Wisconsin, United States [?] 8.7 km North bearing 10° from Monona, Dane County, Wisconsin, United States 10.1 km Northeast bearing 43° from Madison, Dane County, Wisconsin, United States 114.9 km West bearing 276° from Milwaukee, Milwaukee County, Wisconsin, United States
Last position:	2025-12-07 19:27:09 UTC (10m ago) 2025-12-07 13:27:09 CST local time at Maple Bluff, United States [?]
Last telemetry:	2025-12-07 19:30:14 UTC (6m55s ago) – show telemetry Avg 10m: 0.002 Rx Erlang, Avg 10m: 0 Tx Erlang, RxPkts: 1 count/10m, IGateDropRx: 0 count/10m, TxPkts: 0 count/10m
Device:	Kenneth W. Finnegan, W6KWF: Aprx (igate, Linux/Unix)
Last path:	KB9TEN>APRX29 via TCPIP*,qAC,T2TEXAS
Positions stored:	3
APRS igate – Statistics for 2025-12:
Stations heard directly:	21 on radio path – show map
Last heard a station directly:	2025-12-07 18:44:15 UTC (52m54s ago)
Normal receiver range estimate:	10 km (Updated: 2025-11-30 23:06:55 UTC)
Position packets heard directly:	701 on radio path
Position packets sent to APRS-IS:	876 – show map

Only stations from which a position packet has been heard are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.