Comment:	LW6EQG Igate Arduino
Last status:	V.4.3c Rx:71 Digi:0 Tx:4 UpTime:158.30 DX:18-05-2025 15:47z CE3QC-1 via RS0ISS 982km 278°
Location:	34°53.62' S 60°00.33' W - locator FF95XC95IM - show map 1.0 km East bearing 78° from Chivilcoy, Partido de Chivilcoy, Buenos Aires, Argentina [?] 51.1 km Southeast bearing 123° from Chacabuco, Partido de Chacabuco, Buenos Aires, Argentina 123.1 km Southeast bearing 155° from Pergamino, Partido de Pergamino, Buenos Aires, Argentina 125.8 km Southwest bearing 225° from Zárate, Partido de Zárate, Buenos Aires, Argentina
Last position:	2025-05-24 11:58:25 UTC (20m1s ago) 2025-05-24 08:58:25 -03 local time at Chivilcoy, Argentina [?]
Last telemetry:	2025-05-24 11:58:50 UTC (19m36s ago) – show telemetry RxTraffic: 0 Pkt, TxTraffic: 0 Pkt, RxDrop: 0 Pkt, RSSI: -60 dBm, Voltage: 9.270 V
Last path:	LW6EQG-1>AESPG4 via TCPIP*,qAC,T2OSAKA
Positions stored:	2
Other SSIDs:	LW6EQG LW6EQG
APRS igate – Statistics for 2025-05:
Last heard a station directly:	2024-10-10 10:19:41 UTC (226d 1h58m ago)
Position packets sent to APRS-IS:	32 – show map

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.