Comment:	iGate/Fill In Digi - Dunbar, WV via WIDE.
Location:	38°21.90' N 81°45.30' W - locator EM98CI97JO - show map 1.6 km West bearing 287° from Dunbar, Kanawha County, West Virginia, United States [?] 4.8 km West bearing 266° from South Charleston, Kanawha County, West Virginia, United States 10.8 km West bearing 279° from Charleston, Kanawha County, West Virginia, United States 60.4 km East bearing 96° from Huntington, Cabell County, West Virginia, United States
Last position:	2025-10-23 09:27:56 UTC (9s ago) 2025-10-23 05:27:56 EDT local time at Dunbar, United States [?]
Last telemetry:	2025-10-23 09:22:51 UTC (5m14s ago) – show telemetry Avg 10m: 0 Rx Erlang, Avg 10m: 0.002 Tx Erlang, RxPkts: 0 count/10m, IGateDropRx: 0 count/10m, TxPkts: 2 count/10m
Device:	Kenneth W. Finnegan, W6KWF: Aprx (igate, Linux/Unix)
Last path:	N8XJA-10>APRX29 via TCPIP*,qAC,T2RDU
Positions stored:	1
Other SSIDs:	N8XJA-9 N8XJA-7 N8XJA-11 N8XJA-4
APRS igate – Statistics for 2025-10:
Stations heard directly:	16 on radio path – show map
Last heard a station directly:	2025-10-22 23:58:03 UTC (9h30m ago)
Position packets heard directly:	755 on radio path
Position packets sent to APRS-IS:	1009 – show map

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

Only stations from which a position packet has been heard are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.