Last status:	https://github.com/richonguzman/LoRa_APRS_Tracker 2025.03.28
Location:	49°08.38' N 13°33.04' E - locator JN69SD63BM - show map 535.4 m Southwest bearing 229° from Kašperské Hory, Plzeňský Kraj, Czech Republic [?] 9.4 km Northwest bearing 297° from Stachy, Jihočeský Kraj, Czech Republic 107.1 km Northwest bearing 330° from Linz, Upper Austria, Austria 122.6 km Southwest bearing 211° from Prague, Hlavní Mesto Praha, Czech Republic
Last position:	2025-08-12 15:11:24 UTC (1d 1h8m ago) 2025-08-12 17:11:24 CEST local time at Kašperské Hory, Czech Republic [?]
Altitude:	768 m
Device:	Ricardo, CA2RXU: ESP32 LoRa Tracker (tracker)
Last path:	OK2PYA-7>APLRT1 via WIDE1-1,qAO,OK4MD-12
Positions stored:	885
Other SSIDs:	OK2PYA-5 OK2PYA-3 OK2PYA-2

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.