Comment:	Arduino RAZ IGATE
Location:	52°06.65' N 5°07.15' E - locator JO22NC46HO - show map 7.3 km Northwest bearing 312° from Bunnik, Gemeente Bunnik, Utrecht, Netherlands [?] 12.7 km Northwest bearing 300° from Driebergen-Rijsenburg, Gemeente Utrechtse Heuvelrug, Utrecht, Netherlands 33.2 km Southeast bearing 152° from Amsterdam, Gemeente Amsterdam, North Holland, Netherlands 48.5 km Northeast bearing 64° from Rotterdam, Gemeente Rotterdam, South Holland, Netherlands
Last position:	2025-08-26 18:28:30 UTC (4m56s ago) 2025-08-26 20:28:30 CEST local time at Bunnik, Netherlands [?]
Altitude:	4 m
Position ambiguous:	Precision reduced at transmitter by 1 digits, position resolution approximately 185.2 m.
Device:	Unknown: Unknown
Last path:	PE4KH-10>APRS via TCPIP*,qAC,T2CZECH
Positions stored:	1
Other SSIDs:	PE4KH-1 PE4KH-5
APRS igate – Statistics for 2025-08:
Stations heard directly:	1 on radio path – show map
Last heard a station directly:	2025-08-21 08:22:23 UTC (5d 10h11m ago)
Position packets heard directly:	2 on radio path
Position packets sent to APRS-IS:	2 – show map

Only stations from which a position packet has been heard are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.