Comment:	LoRa APRS
Location:	27°32.72' S 153°12.33' E - locator QG62OK49PD - show map 6.2 km West bearing 258° from Cleveland, Redland, Queensland, Australia [?] 12.2 km Northwest bearing 308° from Redland Bay, Redland, Queensland, Australia 19.5 km Southeast bearing 116° from Brisbane, Brisbane, Queensland, Australia 55.2 km Northwest bearing 336° from Gold Coast, Queensland, Australia
Last position:	2025-11-18 20:22:06 UTC (7d 10h5m ago) 2025-11-19 06:22:06 AEST local time at Cleveland, Australia [?]
Last telemetry:	2025-11-18 20:22:06 UTC (7d 10h5m ago) – show telemetry V_Batt: 4.190 VDC
Device:	Ricardo, CA2RXU: ESP32 LoRa iGate (igate)
Last path:	VK4YPB-10>APLRG1 via TCPIP*,qAC,T2PERTH
Positions stored:	300
Other SSIDs:	VK4YPB-5 VK4YPB-6
APRS igate – Statistics for 2025-11:
Stations heard directly:	1 on radio path – show map
Last heard a station directly:	2025-11-18 20:04:43 UTC (7d 10h23m ago)
Position packets heard directly:	179 on radio path
Position packets sent to APRS-IS:	194 – show map

Only stations from which a position packet has been heard are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.