Comment:	LoRa Tracker LILYGO T-BEAM V1.2
Last status:	https://github.com/richonguzman/LoRa_APRS_Tracker 2025-08-11
Location:	53°33.35' N 9°49.20' E - locator JO43VN83JJ - show map 5.2 km South bearing 182° from Schenefeld, Schleswig-Holstein, Germany [?] 7.5 km West bearing 275° from Altona, Hamburg, Germany 11.9 km West bearing 273° from Hamburg, Hamburg, Germany 85.8 km Northeast bearing 51° from Bremen, Bremen, Germany
Last position:	2025-10-27 07:50:04 UTC (1d 40m ago) 2025-10-27 08:50:04 CET local time at Schenefeld, Germany [?]
Altitude:	0 m
Last telemetry:	2025-10-27 07:50:04 UTC (1d 40m ago) – show telemetry Voltage: 4.050 VDC
Device:	Ricardo, CA2RXU: ESP32 LoRa Tracker (tracker)
Last path:	DG2HAM-9>APLRT1 via WIDE1-1,qAO,DG2HAM-10
Positions stored:	331
Other SSIDs:	DG2HAM-7 DG2HAM-10 DG2HAM-8 DG2HAM-i

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.