Comment:	LoRa APRS iGate LILYGO T3 ONLY RX
Location:	53°33.35' N 9°49.20' E - locator JO43VN83JJ - show map 5.2 km South bearing 182° from Schenefeld, Schleswig-Holstein, Germany [?] 7.5 km West bearing 275° from Altona, Hamburg, Germany 11.9 km West bearing 273° from Hamburg, Hamburg, Germany 85.8 km Northeast bearing 51° from Bremen, Bremen, Germany
Last position:	2025-11-23 05:02:49 UTC (14m50s ago) 2025-11-23 06:02:49 CET local time at Schenefeld, Germany [?]
Last telemetry:	2025-11-23 05:02:49 UTC (14m50s ago) – show telemetry V_Batt: 4.810 VDC
Device:	Ricardo, CA2RXU: ESP32 LoRa iGate (igate)
Last path:	DG2HAM-10>APLRG1 via TCPIP*,qAC,T2POLC
Positions stored:	5
Other SSIDs:	DG2HAM-7 DG2HAM-8 DG2HAM-9 DG2HAM-i
APRS igate – Statistics for 2025-11:
Stations heard directly:	18 on radio path – show map
Last heard a station directly:	2025-11-23 05:08:00 UTC (9m39s ago)
Position packets heard directly:	1862 on radio path
Position packets sent to APRS-IS:	2039 – show map

Only stations from which a position packet has been heard are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.