Comment:	APRS-IGATE2
Last beacon:	Using IGate2
Location:	30°34.45' N 111°50.35' E - locator OM50WN07QT - show map 4.8 km South bearing 167° from Banyue, Hubei, China [?] 5.8 km North bearing 16° from Wen’an, Hubei, China 48.9 km Northwest bearing 307° from Shashi, Hubei, China 55.3 km East bearing 106° from Yichang, Hubei, China
Last position:	2025-06-01 14:50:53 UTC (9h4m ago) 2025-06-01 22:50:53 CST local time at Banyue, China [?]
Position ambiguous:	Precision reduced at transmitter by 1 digits, position resolution approximately 185.2 m.
Last path:	BG6UFZ>BEACON via TCPIP*,qAC,SIXTH
Positions stored:	9
Other SSIDs:	BG6UFZ-6 BG6UFZ-7 BG6UFZ-10 BG6UFZ-B BG6UFZ-5 BG6UFZ-12 BG6UFZ-15 BG6UFZ-9 BG6UFZ-1 BG6UFZ-3
APRS igate – Statistics for 2025-06:
Stations heard directly:	1 on radio path – show map
Last heard a station directly:	2025-06-01 14:34:00 UTC (9h21m ago)
Position packets heard directly:	18 on radio path
Position packets sent to APRS-IS:	18 – show map

Only stations from which a position packet has been heard are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.