Station info for CE3VDF-10 – aprs.fi

Station info - map view · info · telemetry · weather · raw · status · beacons · messages · bulletins · browse · moving · my account

It is possible to search using wildcards (*?) after a prefix. Example: OH*

APRS igate – Statistics for 2025-05:
Comment:	PRACTICA SIEMPRE
Last status:	https://github.com/richonguzman/LoRa_APRS_iGate 2025.03.20
Location:	33°52.75' S 70°50.74' W - locator FF46NC89MA - show map 11.2 km Southwest bearing 232° from Paine, Provincia de Maipo, Metropolitana, Chile [?] 18.5 km Southwest bearing 209° from Buin, Provincia de Maipo, Metropolitana, Chile 37.9 km Southwest bearing 220° from Puente Alto, Provincia de Cordillera, Metropolitana, Chile 50.3 km South bearing 201° from Santiago, Provincia de Santiago, Metropolitana, Chile
Last position:	2025-05-10 20:02:59 UTC (19h21m ago) 2025-05-10 16:02:59 -04 local time at Paine, Chile [?]
Last telemetry:	2025-05-10 20:02:59 UTC (19h21m ago) – show telemetry V_Batt: 4.280 VDC
Device:	Ricardo, CA2RXU: ESP32 LoRa iGate (igate)
Last path:	CE3VDF-10>APLRG1 via TCPIP*,qAC,T2BC
Positions stored:	1
Other SSIDs:	CE3VDF-7
Stations heard directly:	7 on radio path – show map
Last heard a station directly:	2025-05-10 17:55:05 UTC (21h29m ago)
Position packets heard directly:	84 on radio path
Position packets sent to APRS-IS:	496 – show map

callsign		pkts	first heard - UTC	last heard	longest	(rx => tx)	longest at - UTC

Only stations from which a position packet has been heard are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.