Comment:	Bat=3.95V 86%
Last status:	https://github.com/richonguzman/LoRa_APRS_Tracker 2025.01.11
Location:	50°39.46' N 10°35.75' E - locator JO50HP17LU - show map 905.9 m North bearing 341° from Benshausen, Thuringia, Germany [?] 3.2 km Southwest bearing 207° from Bermbach, Thuringia, Germany 129.7 km Southwest bearing 226° from Halle Neustadt, Saxony-Anhalt, Germany 135.5 km Southwest bearing 227° from Halle (Saale), Saxony-Anhalt, Germany
Last position:	2025-06-09 11:39:45 UTC (2d 19h ago) 2025-06-09 13:39:45 CEST local time at Benshausen, Germany [?]
Altitude:	485 m
Speed:	83 km/h
Device:	Ricardo, CA2RXU: ESP32 LoRa Tracker (tracker)
Last path:	DG0OPK-7>APLRT1 via WIDE1-1,qAO,DG0OGM-10
Positions stored:	3591
Other SSIDs:	DG0OPK-2 DG0OPK-17 DG0OPK-15 DG0OPK-18 DG0OPK-16 DG0OPK-98 DG0OPK-3 DG0OPK-99 DG0OPK-4 DG0OPK-10 DG0OPK-12 DG0OPK-1

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.