Last status:	https://github.com/richonguzman/LoRa_APRS_Tracker 2025-08-11
Location:	45°30.90' N 9°10.65' E - locator JN45OM13HN - show map 2.7 km South bearing 200° from Bresso, Province of Milan, Lombardy, Italy [?] 2.8 km South bearing 169° from Cormano, Province of Milan, Lombardy, Italy 5.7 km North bearing 351° from Milan, Province of Milan, Lombardy, Italy 126.6 km Northeast bearing 67° from Torino, Provincia di Torino, Piedmont, Italy
Last position:	2025-11-08 13:32:00 UTC (1h3m ago) 2025-11-08 14:32:00 CET local time at Bresso, Italy [?]
Altitude:	236 m
Speed:	1 km/h
Device:	Ricardo, CA2RXU: ESP32 LoRa Tracker (tracker)
Last path:	IK2LFH-7>APLRT1 via WIDE1-1,qAR,IK2LFH-10
Positions stored:	12771
Other SSIDs:	IK2LFH-10

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.