Comment:	LoRa APRS DigiPiter IGate
Last beacon:	Using IGate2
Location:	41°49.26' N 12°45.42' E - locator JN61JT07UA - show map 2.1 km Northeast bearing 50° from Monte Compatri, Provincia di Roma, Latium, Italy [?] 3.3 km East bearing 78° from Monte Porzio Catone, Provincia di Roma, Latium, Italy 24.0 km East bearing 110° from Roma, Provincia di Roma, Latium, Italy 41.3 km North bearing 343° from Latina, Provincia di Latina, Latium, Italy
Last position:	2025-02-10 16:19:33 UTC (23h24m ago) 2025-02-10 17:19:33 CET local time at Monte Compatri, Italy [?]
Last telemetry:	2025-02-10 16:19:33 UTC (23h24m ago) – show telemetry Ch 1: 409, Ch 2: 0, Ch 3: 0, Ch 4: 0, Ch 5: 0
Device:	Ricardo, CA2RXU: ESP32 LoRa iGate (igate)
Last path:	IU0QWK>APLRG1 via WIDE1-1,qAR,IU0QWK-10
Positions stored:	1007
Other SSIDs:	IU0QWK-10 IU0QWK-9 IU0QWK-4 IU0QWK-7 IU0QWK-2 IU0QWK-1 IU0QWK-11 IU0QWK-15 IU0QWK-40

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.