Comment:	,/W2 Summer Shade, KY Metcalfe County DigIgate
Last status:	Bit by Bit Hams; EM76; SummerShade KY
Location:	36°53.04' N 85°39.91' W - locator EM76EV02ED - show map 11.7 km Southwest bearing 204° from Edmonton, Metcalfe County, Kentucky, United States [?] 20.3 km North bearing 7° from Tompkinsville, Monroe County, Kentucky, United States 127.9 km Northeast bearing 51° from Nashville, Davidson County, Tennessee, United States 132.4 km Northeast bearing 29° from Murfreesboro, Rutherford County, Tennessee, United States
Last position:	2026-01-10 16:56:13 UTC (6m11s ago) 2026-01-10 10:56:13 CST local time at Edmonton, United States [?]
Device:	KA2DDO: YAAC (software)
Last path:	K4MMG-10>APJYC1 via TCPIP*,qAC,T2CAEAST
Positions stored:	3
Other SSIDs:	K4MMG-9 K4MMG-7 K4MMG K4MMG-D K4MMG-15 K4MMG-1 K4MMG-2 K4MMG-5 K4MMG-3 K4MMG-Y K4MMG-N K4MMG-C K4MMG-B
APRS igate – Statistics for 2026-01:
Stations heard directly:	31 on radio path – show map
Last heard a station directly:	2026-01-10 16:57:41 UTC (4m43s ago)
Normal receiver range estimate:	300 km (Updated: 2026-01-10 16:46:19 UTC)
Position packets heard directly:	3052 on radio path
Position packets sent to APRS-IS:	3051 – show map

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

Only stations from which a position packet has been heard are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.