Comment:	R-Pi Rx IGate Wface beam, DWolf1.6
Location:	38°59.25' N 85°10.33' W - locator EM78JX97IA - show map 10.4 km West bearing 251° from Dillsboro, Dearborn County, Indiana, United States [?] 11.6 km Southeast bearing 144° from Versailles, Ripley County, Indiana, United States 64.7 km West bearing 253° from Cincinnati, Hamilton County, Ohio, United States 121.2 km Southeast bearing 135° from Indianapolis, Marion County, Indiana, United States
Last position:	2025-05-09 04:59:21 UTC (29m18s ago) 2025-05-09 00:59:21 EDT local time at Dillsboro, United States [?]
Device:	WB2OSZ: DireWolf
Last path:	KB9CIZ-10>APDW16 via TCPIP*,qAC,T2SYDNEY
Positions stored:	1
Other SSIDs:	KB9CIZ-2 KB9CIZ-1 KB9CIZ-3
APRS igate – Statistics for 2025-05:
Stations heard directly:	5 on radio path – show map
Last heard a station directly:	2025-05-09 04:55:46 UTC (32m53s ago)
Normal receiver range estimate:	80 km (Updated: 2024-01-31 23:05:56 UTC)
Position packets heard directly:	130 on radio path
Position packets sent to APRS-IS:	134 – show map

Only stations from which a position packet has been heard are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.