Comment:	DigiPi http://digipi.org/
Location:	39°45.28' N 84°03.19' W - locator EM79XS31OD - show map 6.7 km Southeast bearing 115° from Riverside, Montgomery County, Ohio, United States [?] 11.8 km East bearing 92° from Dayton, Montgomery County, Ohio, United States 74.4 km Northeast bearing 28° from Cincinnati, Hamilton County, Ohio, United States 92.8 km West bearing 256° from Columbus, Franklin County, Ohio, United States
Last position:	2025-10-20 12:37:52 UTC (2m28s ago) 2025-10-20 08:37:52 EDT local time at Riverside, United States [?]
Device:	WB2OSZ: DireWolf
Last path:	KF8EMF-2>APDW18 via TCPIP*,qAC,T2NALA
Positions stored:	4
Other SSIDs:	KF8EMF-D KF8EMF-7 KF8EMF-3 KF8EMF-Y KF8EMF-6 KF8EMF-9 KF8EMF
APRS igate – Statistics for 2025-10:
Stations heard directly:	7 on radio path – show map
Last heard a station directly:	2025-10-13 13:56:53 UTC (6d 22h43m ago)
Position packets heard directly:	39 on radio path
Position packets sent to APRS-IS:	41 – show map

Only stations from which a position packet has been heard are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.