Comment:	github.com/anthonydotmoe/pico-aprs-beacon
Location:	48°17.42' N 122°19.20' W - locator CN88UG19OQ - show map 6.6 km Northeast bearing 34° from Stanwood, Snohomish County, Washington, United States [?] 13.8 km Southwest bearing 205° from Big Lake, Skagit County, Washington, United States 76.0 km North bearing 1° from Seattle, King County, Washington, United States 121.6 km Southeast bearing 151° from Vancouver, British Columbia, Canada
Last position:	2025-10-04 20:01:52 UTC (15d 19h9m ago) 2025-10-04 13:01:52 PDT local time at Stanwood, United States [?]
Device:	Unknown: Experimental
Last path:	KI7TUK-1>APZ via WIDE1-1,qAR,W0FLZ-10
Positions stored:	8
Other SSIDs:	KI7TUK-9 KI7TUK-7

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.