Comment:	Columbus, GA APRS iGate - juestel@gmail.com
Last status:	Serving HAMs in the Metro Columbus, GA area since 2011
Location:	32°32.00' N 84°51.80' W - locator EM72NM67JX - show map 14.2 km Northeast bearing 55° from Columbus, Muscogee County, Georgia, United States [?] 25.0 km South bearing 178° from Hamilton, Harris County, Georgia, United States 120.1 km West bearing 254° from Macon, Bibb County, Georgia, United States
Last position:	2025-05-16 21:37:36 UTC (23s ago) 2025-05-16 17:37:36 EDT local time at Columbus, United States [?]
Device:	Roger Barker, G4IDE: UI-View32 (software, Windows)
Last path:	N4MAR>APU25N via TCPIP*,qAC,T2CAEAST
Positions stored:	33
Other SSIDs:	N4MAR-9
APRS igate – Statistics for 2025-05:
Stations heard directly:	2 on radio path – show map
Last heard a station directly:	2025-05-16 21:34:45 UTC (3m14s ago)
Normal receiver range estimate:	10 km (Updated: 2025-04-29 12:05:09 UTC)
Position packets heard directly:	558 on radio path
Position packets sent to APRS-IS:	715 – show map

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

Only stations from which a position packet has been heard are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.