Comment:	fixed 5W
Mic-E message:	Custom 0
Location:	37°55.87' S 145°04.40' E - locator QF22MB86TM - show map 6.1 km East bearing 84° from Hampton, Bayside, Victoria, Australia [?] 6.5 km Southeast bearing 114° from North Brighton, Bayside, Victoria, Australia 16.2 km Southeast bearing 143° from Melbourne, Melbourne, Victoria, Australia 66.8 km East bearing 69° from Geelong, Greater Geelong, Victoria, Australia
Last position:	2025-07-02 17:58:51 UTC (1d 15h10m ago) 2025-07-03 03:58:51 AEST local time at Hampton, Australia [?]
Course:	0°
Speed:	0 km/h
Device:	Yaesu: FT3D (ht)
Last path:	VK3SPM-7>DHF5X7 via WIDE1-1,WIDE2-1,qAR,VK3RSA-1
Positions stored:	32
Other SSIDs:	VK3SPM-R VK3SPM-D VK3SPM-Y

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.