Comment:	Bat=4.00V 83%
Last status:	https://github.com/richonguzman/LoRa_APRS_Tracker 2025-08-11
Location:	38°00.87' S 145°19.37' E - locator QF21PX86RM - show map 8.3 km West bearing 254° from Beaconsfield Upper, Cardinia, Victoria, Australia [?] 14.6 km South bearing 171° from Ferntree Gully, Knox, Victoria, Australia 38.6 km Southeast bearing 125° from Melbourne, Melbourne, Victoria, Australia 85.4 km East bearing 80° from Geelong, Greater Geelong, Victoria, Australia
Last position:	2025-11-04 04:14:11 UTC (2d 16h8m ago) 2025-11-04 15:14:11 AEDT local time at Beaconsfield Upper, Australia [?]
Altitude:	55 m
Device:	Ricardo, CA2RXU: ESP32 LoRa Tracker (tracker)
Last path:	VK3YY-7>APLRT1 via WIDE1-1,qAO,VK3YY-10
Positions stored:	1018
Other SSIDs:	VK3YY-10 VK3YY VK3YY-9

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.