Mic-E message:	In service
Location:	47°30.91' N 123°15.50' W - locator CN87IM93AP - show map - static map 33.1 km West bearing 283° from Belfair, Mason County, Washington, United States [?] 35.1 km Southwest bearing 247° from Seabeck, Kitsap County, Washington, United States 70.2 km West bearing 262° from Seattle, King County, Washington, United States 102.3 km South bearing 175° from Victoria, British Columbia, Canada
Last position:	2022-09-20 15:55:45 UTC (133d 6h51m ago) 2022-09-20 08:55:45 PDT local time at Belfair, United States [?]
Altitude:	1393 m
Course:	137°
Speed:	0 km/h
Device:	Kenwood: TH-D72 (ht)
Last path:	W7OMR-1>T7SPYQ via WIDE1-1,WIDE2-1,SAR-1,WIDE1-1,WIDE2-1,qAO,N7BTS-10 This station is transmitting packets with a configured path of over 3 digipeaters. This causes serious congestion in the APRS network and errors when plotting the station's route on a map. Please consider using a path of WIDE1-1,WIDE2-1 or WIDE2-2, or even WIDE1-1,WIDE2-2 if you are moving very far away from an iGATE. If WIDE1-1 is used in the path, it should be the first component of the path, so that a fill-in digipeater would be the first one to retransmit the packet.
Positions stored:	12673
Other SSIDs:	W7OMR W7OMR-9 W7OMR-3 W7OMR-2

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.