Comment:	KERRVILLE,TX/EM00LB/INTERTIE,INC./4
Last beacon:	KERRVILLE
Location:	30°03.51' N 99°03.86' W - locator EM00LB24GA - show map 7.4 km East bearing 80° from Kerrville, Kerr County, Texas, United States [?] 17.1 km East bearing 97° from Ingram, Kerr County, Texas, United States 89.4 km Northwest bearing 322° from San Antonio, Bexar County, Texas, United States 98.8 km Northwest bearing 294° from New Braunfels, Comal County, Texas, United States
Last position:	2026-01-02 04:31:35 UTC (5m47s ago) 2026-01-01 22:31:35 CST local time at Kerrville, United States [?]
Device:	Kantronics: KPC-3
Last path:	WX5II-6>APN391 via WIDE3-3,qAO,KB5TX-10
Positions stored:	28
Other SSIDs:	WX5II-2 WX5II-5 WX5II-15 WX5II-11 WX5II-12 WX5II-9 WX5II-4 WX5II-10 WX5II-7 WX5II WX5II-8 WX5II-13 WX5II-3
Last heard a station directly:	2025-12-31 02:46:36 UTC (2d 1h50m ago)
Normal receiver range estimate:	190 km (Updated: 2023-12-31 23:54:44 UTC)

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.